- New
Venus OS v3.70
- switch pane improvement -
- shelly integration -
- CANopen integration -
- improved boat page -
- Lynx BMS NG cell monitoring -
- NodeRed virtual switches -
- Garmin EmpireBus switching -
- Safiery Star switching -
- Pylontech update over VRM -
- Gobius sensor integration -
- Orion XS NMEA2000 -
and a lot more
Featured products
Lithium SuperPack 12.8V/100Ah NG
BAT512110740
Lithium SuperPack 12.8V/100Ah NG
- Battery voltage: 12.8V, 100Ah (25°)
- 200Amp discharge, 100Amp charge
- internal BMS & battery monitor, Victron Connect
- main switch, heater 65 W, no series connection!
- 273 x 173 x 173mm, 10.7kg
Accessories / Levy
VRG - prepaid recycling fee
|
VRG - Lithium, 10'001 - 13'000 gr. |
Lithium battery 12.8V 100Ah - NG
The Lithium SuperPack NG battery is a direct replacement for conventional lead-acid batteries in motorhomes and leisure vehicles.
Ideal for new builds or retrofits, it works with the VictronConnect app.
The shape and arrangement of the terminals allow for easy installation in a wide range of vehicles, such as large trucks, SUVs and motorhomes.
Available in 12V, 24V and 48V models, it features an integrated battery management system, built-in heater for charging in sub-zero temperatures and an on/off switch for safe off-season storage without the need to remove the battery.
The VictronConnect app allows users to monitor the state of charge and configure settings.
The Lithium SuperPack NG delivers continuous peak power and eliminates the need for bulky battery banks. It fits under a passenger seat or in other tight spaces, making a lithium upgrade even easier.
Key features:
- Bluetooth monitoring and control:
Includes Bluetooth Smart for wireless configuration, monitoring and firmware updates via the VictronConnect app.
Instant Readout shows important data such as state of charge (SoC), battery temperature, warnings and alarms directly in the device list without the need for a connection.
- Integrated BMS and battery monitor:
Integrates cell balancing, protection and monitoring functions to ensure optimal performance and safety throughout the battery's lifetime.
- External feedback signal (EFS):
Provides a battery voltage signal limited to 250 mA. The EFS serves as an external disconnect signal (EDS) to trigger an event for redundant system protection. In addition, the EFS can be configured as an External Charging Signal (ECS) based on the low SoC pre-alarm threshold to activate a charge start signal.
- Self-heating function:
Keeps the battery temperature above the minimum safe charging limit to ensure reliable operation in cold environments. Two heating modes are available:
Charger mode: The heater is supplied with power via the charger connection and activates automatically if the cell temperature falls below 0 °C before charging (default setting).
Automatic mode: The battery supplies power to the heater to keep the cells above the minimum safe charging temperature for immediate charging. This is limited by the internal energy of the battery. If the SoC falls below the minimum safe charge level limit, the heater is switched off and charging remains unavailable.
- LED status indicator:
Two integrated LEDs indicate the Bluetooth connection, warning and alarm statuses or the status of the firmware update.
- On/Off push button: Push button for switching the battery on and off, which deactivates both the charging and discharging function to ensure safe operation and a longer storage time.
- High efficiency:
Operating efficiency of 93 %.
- Parallel connection:
Supports parallel connection of an unlimited number of batteries to increase the total energy capacity.
The total current of the system should not exceed the maximum current that a single battery can safely interrupt.
- Configurable discharge lower limit:
Defines a minimum state of charge to avoid excessive discharge while maintaining reserve capacity. When the threshold is reached, VictronConnect will display a Low SoC alarm and the Allowed to Discharge (ATD) indicator will be turned off until the state of charge rises above the defined threshold.
VictronConnect
With VictronConnect you can query live status information and configure all Victron products that either have a built-in Bluetooth function or are connected to a VE.Direct Bluetooth Smart Dongle.
BAT512110740
Data sheet
- Battery voltage
- 12.8V
- Capacity / Ah
- 100Ah
- Charging current
- 400A (recommended 100A)
- Discharge current
- Connections
- Battery length (mm)
- 273mm
- Battery width (mm)
- 173mm
- Battery height (mm)
- 173mm*
- Protection class IP
- IP 65
- Interface
- Bluetooth & Externes Feedbacksignal (EFS)
- Heat output
- 65W
- Feature
- Feature
- 50 batteries can be connected together. max. 5 BMS to one system
- Weight
- 10.7
- Operating life
- 80% discharge - 2500 cycles
- Operating life
- 50% discharge - 5000 cycles
- Battery chemistry
- LFP
- Charging voltage Bulk / Absorption
- 14V
- Charging voltage Float
- 13.5V
- Absorption time
- min. 1 hour depending on application 2 hours
- Charging temperature (°C)
- -30°C bis 60°C (unter 0°C Heizfunktion)
- Discharge temperature (°C)
- -30°C bis 60°C
- Guarantee
- 3 years
- Cell type
- Prismatic cell
- Note
- Note
- Note
- Installation
- kann Pole oben oder auf der lange Seite liegend montiert werden!
- Manufacturer data sheet & operating instructions
- https://www.victronenergy.de/batteries/lithium-battery-12-8v#datasheet
- Certificates
- UN38.3, ECE R10, mehr siehe Datenblatt
- Final discharge voltage
- 11.2V
Specific References
- EAN13
- 8719076069430
- MPN
- BAT512110740
Lithium SuperPack 12.8V/100Ah NG
- Battery voltage: 12.8V, 100Ah (25°)
- 200Amp discharge, 100Amp charge
- internal BMS & battery monitor, Victron Connect
- main switch, heater 65 W, no series connection!
- 273 x 173 x 173mm, 10.7kg