BBR Remote Control Charging Booster - Sterlingpower

Remote control BBR battery to battery charger

The following functions can be adjusted and current values displayed.

* Current voltage and current of the battery output
* Adjustment to an individual charging profile
* Current limitation to 100%, 85% and 65%
* Switching trickle charging on/off for lithium batteries
* Equalisation charging and desulphation setting can be adjusted and switched on.

Note:

The remote control works optimally with devices purchased after June 2022.
Older devices require a firmware update, for this the device must be returned to SterlingPower England

Why should I adjust the current limit?

The default power setting for the BB range is 100% - this means that the power is set to full power by default.
If you want to reduce the power of the BB, you can set 85% or 65% here.

Examples of why you might want to reduce the power:

1) If you have solar panels and the weather is good, you can save fuel by reducing the output of the alternator.

2) The alternator is better suited to running at a slightly lower amperage than expected.

3) Your battery supplier may advise you to charge the battery at a slightly lower current. If one of your lithium batteries in your leisure battery bank fails, you may exceed the C rating of the remaining batteries.

4) Future proofing. If you have a high performance battery installed, you should assume that one day you will install a larger alternator and/or more batteries in your system. You can reduce the output for the immediate installation and increase the output of the device at a later date.