CAN terminating resistor (M12 / 5-pin) female

- M12 5-pin micro style connector (NMEA2000)
- IP67, 120 Ohm
- for terminating CAN networks

CAN terminating resistor (M12 / 5-pin) male

- M12 5-pin micro style connector (NMEA2000)
- IP67, 120 Ohm
- for terminating CAN networks

Ve.Direct to USB interface

- for programming and monitoring
from VE.Direct devices
- for expanding VE.Direct connections on GX devices

CAN-Splitter / T-joiner (M12

- M12 5-pin micro style connector (NMEA2000)
- for connecting devices in CAN networks
- 2x female / 1x male

CAN patch cable - 0.6m (M/W)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 0.6m
- for connecting Nomia and Nomada Super-B batteries

Ve.Direct to Bluetooth interface

- for programming and monitoring
from VE.Direct devices without Bluetooth
- with VictronConnect App mobile

CAN Bus USB Interface

- for connecting Can.Bus devices to a PC

RJ45 VE.Can terminator (PU 2 pcs.)

Remote ON / OFF cable for Multiplus

- Remote switching MultiPlus via AUX inputs, switching voltage up to 70V
- Use with non Victron Lithium BMS for charge / discharge control
- Assistant programming required.

Remote ON / OFF cable for Skylla TG

- Remote switching of Skylla TG chargers, switching voltage up to 70V
- Use with lithium BMS for charge control

RS485 to USB converter

- For connecting a netmeter to
a Cerbo GX
- 1.8m cable

RS485 to USB converter

- For connecting a net meter to
a Cerbo GX
- 5m cable

Ve.Bus to USB interface

- for programming and monitoring
of VE.Bus devices via computer
- for VictronConnect and Apple

GPS antenna for GSM and LTE router

- active GPS antenna for GSM & LTE router
- for displaying the position
- cable length 3m
- SMA antenna connection

Smart BMS CL 12-100 MultiPlus control cable

- for switching MultiPlus ON / OFF without VE.Bus
- Controlled via remote input
- Utilises "High" signal from BMS

VE.CAN to CAN Bus BMS Cable - Type A

- Cable to connect a CAN bus BMS capable battery
to Victron - 1.8m
- 2 options available

VE.CAN to CAN Bus BMS cable - Type A

- Cable to connect a CAN bus BMS capable battery
to Victron - 5m
- 2 options available

VE.CAN to CAN Bus BMS Cable - Type B

- Cable to connect a CAN bus BMS capable battery
to Victron - 1.8m
- 2 options available

VE.CAN to CAN Bus BMS Cable - Type B

- Cable to connect a CAN bus BMS capable battery
to Victron - 5m
- 2 options available

RS232 to USB converter

Current transformer 100A - 1m

- Measuring range: 100 A / 50 mA for MultiPlus-II / MultiGrid-II
- Cable length: 1m

Current transformer 100A - 5m

- Measuring range: 100 A / 50 mA for MultiPlus-II / MultiGrid-II
- Cable length: 5m

Outdoor 4G GSM antenna

- for connection to the GSM or LTE GX modem
- cable length 3m
- SMA antenna connection

CAN patch cable - 0.6m (M/M)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 0.6m
- for connecting Nomia and Nomada Super-B batteries

CAN patch cable - 1m (M/W)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 1m
- for connecting Nomia and Nomada Super-B batteries

CAN patch cable - 5m (M/W)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 5m
- for connecting Nomia and Nomada Super-B batteries

M8 round connector 3-pin - 1m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 1m, 2 pieces