Small BMS Victron Lithium battery management

- controls charge / discharge relay (10mA / 1mA)
- pre-alarm relay & system ON / OFF
- no VE.Bus control

VE.BUS BMS v2 Victron Lithium Battery Management

- controls MultiPlus & Quattro's
- controls charge / discharge relay (2A / 10mA)
- pre-alarm relay & system ON / OFF, GX Power
- control of MPPT via Cerbo GX, MultiP On / OFF

VE.BUS BMS Victron Lithium battery management

- controls MultiPlus & Quattro's
- controls charge / discharge relay (2A / 10mA)
- pre-alarm relay & system ON / OFF

Lynx Smart BMS for Victron lithium batteries

- Battery voltage 12-48V, max. current 600A
- Battery monitor, BMS, main relay,
- Interface VE.Can (NMEA2000 capable), Bluetooth

Lynx Smart BMS for Victron lithium batteries

- Battery voltage 12-48V, max. current 1000A
- Battery monitor, BMS, main relay,
- Interface VE.Can (NMEA2000 capable), Bluetooth

Smart BMS 12V / 100Amp

- Vehicle charge limiter 100Amp, battery sp. 12V
- Outputs to control charge / discharge
- Remote, alarm contacts, Bluetooth, status LEDs

Smart BMS 12V / 100A / 200A

- Vehicle charging limit 100Amp, system current 200Amp
- Outputs to control charging / discharging
- Remote, alarm contacts, Bluetooth, status LEDs

Battery balancer (state of charge equaliser)

- From 24V systems with 12V batteries
- 0.7A equalising charge
- parallel connection possible

Solidstate switch

- Switching of DC loads up to 70V/4A with low power (>3.3V >30uA)
- Use with lithium BMS for charge/discharge control
- Can also be used for switching alternators.

4-way distributor plus & minus for MEGA fuses

- System voltage 12-48V, maximum current 1000A
- M8 connections, for 4 MEGA fuses
- Connection of plus & minus, with cover cap,
- suitable for Lynx BMS 500

4-way distributor plus & minus for MEGA fuses

- System voltage 12-48V, maximum current 1000A
- Connections M10, for 4 MEGA fuses
- Connection of plus & minus, with cover cap,
- Suitable for Lynx BMS 1000

4-way distributor plus & minus without fuses

- System voltage 12-48V, maximum current 1000A
- M8 connections, without fuses
- Connection of plus & minus, with cover cap
- Suitable for Lynx BMS 500

4-way distributor plus & minus without fuses

- System voltage 12-48V, maximum current 1000A
- Connections M10, without fuses
- Connection of plus & minus, with cover cap
- Suitable for Lynx BMS 1000

M8 round connector 3-pin - 1m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 1m, 2 pieces

M8 round connector 3-pin - 2m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 2m, 2 pieces

M8 round connector 3-pin - 3m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 3m, 2 pieces

M8 round connector 3-pin - 5m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 5m, 2 pieces

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 12-24V, continuous current: 120A, max. 180A
- for Victron VE.Bus and Small BMS
- Emergency switch-on possible

Cyrix Lithium BMS charge cut-off switch

- Battery voltage 12-24V, continuous current: 120A, max. 180A
- for Victron VE.Bus and Small BMS
- emergency switch-on possible

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 12-24V, continuous current: 230A, max. 500A
- for Victron VE.Bus and Small BMS
- Emergency switch-on possible

Cyrix Lithium BMS charge cut-off switch

- Battery voltage 12-24V, continuous current: 230A, max. 500A
- for Victron VE.Bus and Small BMS
- Emergency switch-on possible

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 24-48V, continuous current: 120A, max. 180A
- for Victron VE.Bus and Small BMS
- Emergency switch-on possible

Cyrix Lithium BMS charge cut-off switch

- Battery voltage 24-48V, continuous current: 230A, max. 500A
- for Victron VE.Bus and Small BMS
- Emergency switch-on possible

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 24-48V, continuous current: 230A, max. 500A
- for Victron VE.Bus and Small BMS
- Emergency switch-on possible

VE.CAN to CAN Bus BMS Cable - Type B

- Cable to connect a CAN bus BMS capable battery
to Victron - 5m
- 2 options available

VE.CAN to CAN Bus BMS Cable - Type B

- Cable to connect a CAN bus BMS capable battery
to Victron - 1.8m
- 2 options available

VE.CAN to CAN Bus BMS cable - Type A

- Cable to connect a CAN bus BMS capable battery
to Victron - 5m
- 2 options available

VE.CAN to CAN Bus BMS Cable - Type A

- Cable to connect a CAN bus BMS capable battery
to Victron - 1.8m
- 2 options available

Remote ON / OFF cable for VE.Direct MPPT charge controller

- Remote switching of VE.Direct solar charge controller, switching voltage up to 70V
- Use with lithium BMS for charge control
- !!! large MPPT have a remote connection

Remote ON / OFF cable for Multiplus

- Remote switching MultiPlus via AUX inputs, switching voltage up to 70V
- Use with non Victron Lithium BMS for charge / discharge control
- Assistant programming required.

Smart BMS CL 12-100 MultiPlus control cable

- for switching MultiPlus ON / OFF without VE.Bus
- Controlled via remote input
- Utilises "High" signal from BMS