Victron MicroGrid
A modular approach to large,
flexible off-grid power systems
Featured products
Smart BMS 12/200 (Victron Smart Lithium)
BMS210055000
Smart BMS 12V / 100A / 200A
- Vehicle charging limit 100Amp, system current 200Amp
- Outputs to control charging / discharging
- Remote, alarm contacts, Bluetooth, status LEDs
Smart BMS CL 12/100
The Smart BMS 12/200 is a complete battery management system for intelligent lithium iron phosphate batteries (LiFePO4) from Victron. It has been specially developed for 12 V systems with a 12 V alternator, e.g. for vehicles and boats.
It combines a current limiter, a battery combiner and battery protection in a robust and compact solution and enables the safe connection of 12 V alternators (and starter batteries), loads and chargers to smart lithium batteries of any size.
The Smart BMS 12/200 monitors and protects each individual battery cell within the battery (or battery bank) and disconnects the alternator, charging sources or DC loads in the event of low battery cell voltage, high battery cell voltage or overheating.
The dedicated alternator connection enables current limiting and one-way traffic from the alternator into the battery, so that any size alternator (and starter battery) can be safely connected to the Smart Lithium battery (or battery bank) and the starter battery is protected from excessive discharge.
The BMS is equipped with Bluetooth for monitoring and configuration; a remote on/off port to switch off the BMS (and system) via a remote switch; and a pre-alarm contact to provide a warning signal before the BMS disconnects the batteries from the system.
VictronConnect
VictronConnect allows you to check live status information and configure all Victron products that either have a built-in Bluetooth function or are connected to a VE.Direct Bluetooth Smart Dongle.
BMS210055000
Data sheet
- Charging current
- 200Amp / system side
- Charging current
- 100A alternator side
- Discharge current
- 200A (peak 400A)
- Connections
- Flat plug 6.3 mm
- Connections
- M8
- Protection class IP
- IP 65
- Interface
- Bluetooth
- Dimension
- 65 x 120 x 340 mm
- Weight
- 2kg
- Manufacturer data sheet & operating instructions
- https://www.victronenergy.de/battery-management-systems/smart-bms-12-200#datasheet
- System voltage
- 12V
Specific References
- EAN13
- 8719076052883
You might also like
Smart BMS 12V / 100A / 200A
- Vehicle charging limit 100Amp, system current 200Amp
- Outputs to control charging / discharging
- Remote, alarm contacts, Bluetooth, status LEDs