4-way distributor plus & minus for MEGA fuses

- System voltage 12-48V, maximum current 1000A
- M8 connections, for 4 MEGA fuses
- Connection of plus & minus, with cover cap,
- suitable for Lynx BMS 500

BMS relay for Super-B Nomia

- System voltage: 12V, current 250Amp (peak 1500Amp)
- bistable, switching voltage 12V
- continuous current limitation 190 A at 85°C, incl. cable & plug

Battery balancer (state of charge equaliser)

- From 24V systems with 12V batteries
- 0.7A equalising charge
- parallel connection possible

Smart BMS 12V / 100Amp

- Vehicle charge limiter 100Amp, battery sp. 12V
- Outputs to control charge / discharge
- Remote, alarm contacts, Bluetooth, status LEDs

Small BMS Victron Lithium battery management

- controls charge / discharge relay (10mA / 1mA)
- pre-alarm relay & system ON / OFF
- no VE.Bus control

Solidstate switch

- Switching of DC loads up to 70V/4A with low power (>3.3V >30uA)
- Use with lithium BMS for charge/discharge control
- Can also be used for switching alternators.

CAN patch cable - 0.6m (M/M)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 0.6m
- for connecting Nomia and Nomada Super-B batteries

Lynx Smart BMS for Victron lithium batteries

- Battery voltage 12-48V, max. current 600A
- Battery monitor, BMS, main relay,
- Interface VE.Can (NMEA2000 capable), Bluetooth

M8 round connector 3-pin - 1m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 1m, 2 pieces

M8 round connector 3-pin - 5m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 5m, 2 pieces

M8 round connector 3-pin - 3m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 3m, 2 pieces

M8 round connector 3-pin - 2m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 2m, 2 pieces

4-way distributor plus & minus without fuses

- System voltage 12-48V, maximum current 1000A
- M8 connections, without fuses
- Connection of plus & minus, with cover cap
- Suitable for Lynx BMS 500

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 12-24V, continuous current: 120A
- for Victron VE.Bus, Small BMS & Lynx BMS
- Emergency switch-on possible

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 24 / 48V, continuous current: 120A / 40A
- for Victron VE.Bus, Small BMS & Lynx BMS
- Emergency switch-on possible

Cyrix Lithium BMS charge cut-off switch

- Battery voltage 12-24V, continuous current: 120A
- for Victron VE.Bus, Small BMS & Lynx BMS
- emergency switch-on possible

Cyrix Lithium BMS charge cut-off switch

- Battery voltage 24-48V, continuous current: 230A / 80A
- for Victron VE.Bus, Small BMS & Lynx BMS
- emergency switch-on possible

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 12-24V, continuous current: 230A, max. 500A
- for Victron VE.Bus and Small BMS
- Emergency switch-on possible

Cyrix Lithium BMS discharge circuit breaker

- Battery voltage 24-48V, continuous current: 230A / 80A
- for Victron VE.Bus, Small BMS & Lynx BMS
- Emergency switch-on possible

Cyrix Lithium BMS charge cut-off switch

- Battery voltage 12-24V, continuous current: 230A
- for Victron VE.Bus, Small BMS & Lynx BMS
- Emergency switch-on possible

VE.CAN to CAN Bus BMS Cable - Type B

- Cable to connect a CAN bus BMS capable battery
to Victron - 5m
- 2 options available

VE.CAN to CAN Bus BMS Cable - Type B

- Cable to connect a CAN bus BMS capable battery
to Victron - 1.8m
- 2 options available

VE.CAN to CAN Bus BMS cable - Type A

- Cable to connect a CAN bus BMS capable battery
to Victron - 5m
- 2 options available

VE.CAN to CAN Bus BMS Cable - Type A

- Cable to connect a CAN bus BMS capable battery
to Victron - 1.8m
- 2 options available

Remote ON / OFF cable for VE.Direct MPPT charge controller

- Remote switching of VE.Direct solar charge controller, switching voltage up to 70V
- Use with lithium BMS for charge control
- !!! large MPPT have a remote connection

Remote ON / OFF cable for Multiplus

- Remote switching MultiPlus via AUX inputs, switching voltage up to 70V
- Use with non Victron Lithium BMS for charge / discharge control
- Assistant programming required.

CAN patch cable right-angled - 0.25m (M/W)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 0.25m
- for connecting Nomia and Nomada Super-B batteries

Smart BMS CL 12-100 MultiPlus control cable

- for switching MultiPlus ON / OFF without VE.Bus
- Controlled via remote input
- Utilises "High" signal from BMS

Battery Interface Box Super-B 12V - 350A

- connects several Super-B batteries together
- with integrated load relay and pre-charging
- button for ON / OFF / Reset

Smart BMS 12V / 100A / 200A

- Vehicle charging limit 100Amp, system current 200Amp
- Outputs to control charging / discharging
- Remote, alarm contacts, Bluetooth, status LEDs