What to expect:
Thousands of vans
Live music
Community vibes
Knowledge sharing
Exhibitors
Fun activities
For the whole family
Music Line Up:
- Snap! - Fr. 3.7
- Cari Cari - Sat. 4.7
- Deloraine - Sat. 4.7
- Dawn Brothers - 5.7
- Classical Concert - 5.7
with Candlelight
Featured products
Cyrix-Li-charge 12/24V-230A
CYR010230430
Cyrix Lithium BMS charge cut-off switch
- Battery voltage 12-24V, continuous current: 230A
- for Victron VE.Bus, Small BMS & Lynx BMS
- Emergency switch-on possible
Cyrix Lithium BMS Battery Coupler
The Cyrix battery coupler is a high performance microprocessor controlled relay which can be used to protect Victron LiFePO4 batteries.
AllVictron LiFePO4 batterieshavean integrated cell equalization functionto prevent cell undervoltage, overvoltage and overtemperature. This regulates the differences between the cells internally and tells the external BMS whether it should switch charging or discharging on or off.
- Switching off the load in the event of an imminent cell undervoltage and
- Switching off or reducing the charging current in the event of an imminent cell overvoltage, a high temperature (>50°C) or a low temperature (<0°C).
The core of this protective measure is the VE.Bus BMS or the Small BMS, but the VE.Bus BMS can only tell VE.Bus devices directly to interrupt charging or discharging. Other loads or chargers must be controlled externally. This is also the case with the Small BMS, which cannot control VE.Bus devices.
Several Cyrix switches that can be controlled by the BMS are available to switch off such loads or chargers.
The models differ in:
System voltage, load strength and whether a load or a charge is to be controlled.
Load is used to control the load and Charge to control the charge.
Please contact us, for more complex systems it often makes sense to consult us.
CYR010230430
Data sheet
- Amperage
- 230A
- Connections
- M6
- Protection class IP
- IP54
- Dimension
- 65 x 100 x 50mm
- Weight
- 0.27kg
- Note
- For charge disconnection via a Victron BMS
- Manufacturer data sheet & operating instructions
- https://www.victronenergy.de/battery-isolators-and-combiners/cyrix-battery-combiners#datasheets
- System voltage
- 12 - 24V
Specific References
- EAN13
- 8719076022237
You might also like
Cyrix Lithium BMS charge cut-off switch
- Battery voltage 12-24V, continuous current: 230A
- for Victron VE.Bus, Small BMS & Lynx BMS
- Emergency switch-on possible