- New
Victron MicroGrid
A modular approach to large,
flexible off-grid power systems
Featured products
VE.BUS BMS v2 (Victron SmartLithium)
BMS300200200
VE.BUS BMS v2 Victron Lithium Battery Management
- controls MultiPlus & Quattro's
- controls charge / discharge relay (30mA / 1A)
- pre-alarm relay & system ON / OFF, GX Power
- control of MPPT via Cerbo GX, MultiP On / OFF
Accessories / Levy
BMS components
Cable
System integration
VE.Bus BMS v2 for Victron Lithium Smart Batteries
VE.Bus BMS and VE.Bus BMS V2 are battery management systems (BMS) designed to connect and protect one or more 12.8V & 25.6V Lithium Battery Smart batteries (LiFePO4 or LFP) in systems with Victron inverters or inverter/chargers with VE.Bus-Kommunikation. It monitors and protects the batteries against over and under voltage of each individual cell and also against over and under temperature.
Depending on the status of the battery(ies), the BMS will:
- Generate a pre-alarm signal to warn of an imminent under voltage of the cell.
Deactivate inverter operation of inverters or inverter/chargers via VE.Bus and switch off other loads via the "Disconnect load" terminal in the event of a cell undervoltage.
- Deactivate charging in VE.Bus inverters/chargers via VE.Bus and deactivate other chargers via the "Disconnect charging" terminal in the event of a cell overvoltage, undertemperature or overtemperature.
The "original" VE.Bus BMS is best used in systems without a GX device.
The "next generation" VE.Bus BMS V2 has additional features such as:
- terminals for remote on/off switching.
- Possibility to deactivate VE.Direct and VE.Can solar chargers via a GX device.
- Possibility to control the VE.Bus inverter/charger from several devices, such as the Digital Multi Control, the VE.Bus Smart Dongle and/or a GX device.
- Terminals for additional inputs and outputs that allow a GX device to remain powered in the event of a system shutdown (low battery).
BMS300200200
Data sheet
- Input voltage
- 8 - 70VDC
- Connections
- M8
- Connections
- RJ45
- Connections
- Phoenix terminal contacts
- Connections
- Power supply for GX devices 1Amp
- Connections
- AUX In - External power supply for GX device
- Protection class IP
- IP 20
- Interface
- VE.Bus, M8
- Feature
- Consumption: 10 mA (except when output is switched)
- Dimension
- 24 x 95 x 106 mm
- Manufacturer data sheet & operating instructions
- Stromversorgung für GX Geräte 1Amp
Specific References
- EAN13
- 8719076057277
- MPN
- BMS300200200
You might also like
VE.BUS BMS v2 Victron Lithium Battery Management
- controls MultiPlus & Quattro's
- controls charge / discharge relay (30mA / 1A)
- pre-alarm relay & system ON / OFF, GX Power
- control of MPPT via Cerbo GX, MultiP On / OFF