Phoenix 12/375 VE.Direct Schuko

Phoenix inverters VE.Direct

Inverters can be used to supply household appliances - which require 230 V/120 V AC - with electricity.
Batteries for "leisure applications" or "car" batteries, which are rated at 12 V, 24 V or 48 V DC,
are used for this purpose.

Models: 250VA, 375VA, 500VA, 800VA, 1200VA

VE.Direct Communication connection

The VE.Direct-Anschluss can be connected to the following devices:
- To a computer (VE.Direct to USB interface cable required)
- To Apple and Android smartphones, tablets, Macbooks or other devices

(VE.Direct Bluetooth Smart Dongle required).

Fully configurable:

- Threshold values for triggering and resetting alarms when the battery is low.
- Threshold values for switching off and restarting when the battery voltage is low.
- Dynamic switch-off: load-dependent switch-off threshold
- Output voltage 210 - 245V
- Frequency 50 Hz or 60 Hz
- Threshold value for ECO mode on/off and ECO mode sensor

Monitoring:

- Input and output voltage, % load and alarms

Proven reliability

The complete bridging additionally with a ring transformer topology has proven itself for years.
The inverters are short-circuit-proof and protected against overheating (whether caused by overloading or by the
ambient temperature).

High switch-on power

This is required for switching on loads such as voltage converters for LED lamps,
halogen lamps or power tools.

ECO mode

In ECO mode, the inverter switches to standby as soon as the load falls below a preset value
(minimum load: 15W). In standby mode, the inverter then switches on for a short
period (adjustable default setting: every 2.5 seconds). If the load exceeds a
preset threshold value, the inverter remains switched on.

Remote-controlled on/off switching

A remote on/off switch can be connected with a two-pole plug or between the positive pole of the
battery and the left contact of the two-pole plug.

LED diagnostics

Please refer to the description in the manual.

Load switching to another AC power source: the automatic transfer switch

We recommend our Filax Automatic Transfer Switch for our low-power inverters. With the
Filax, the switchover takes place very quickly (in less than 20 milliseconds), so that uninterrupted
operation of computers and other electronic devices is guaranteed.

Available with different output sockets:

Schuko, IEC