RuuviTag Pro Bluetooth Environmental Sensor 2 in 1 - IP68

RuuviTag Bluetooth temperature, motion sensor in industrial design

RuuviTag Pro 2 in 1 is a rugged IP-certified environmental sensor for monitoring temperature, motion.

The Pro is based on the successful RuuviTag concept and also offers some new, outstanding features.
RuuviTag Pro is the most robust open source sensor on the market.

Moisture-certified

RuuviTag Pro can withstand wet and harsh conditions.

The IP67-certified RuuviTag Pro (3-in-1) is equipped with a breathable membrane that enables humidity monitoring. It can withstand temporarily wet conditions.

The IP68 and IP69K certified RuuviTag Pro (2-in-1) offers full protection against water with its fully sealed housing.
It has been laboratory tested to work for 24 hours in water depths of up to 50 metres and to withstand high-pressure sprays of 80°C water.


Note! Please note that Bluetooth signals are greatly attenuated in water and the range is significantly reduced. Ruuvi-Sensors can therefore be used in shallow water if you want to maintain the connection (e.g. in a pool or whirlpool). If you want to measure deeper, you can attach the RuuviTag Pro to a string and bring it back to the surface when you want to download the data history.

Medical grade temperature accuracy

RuuviTag Pro has an extremely accurate temperature sensor. The sensor fulfils the requirements of ASTM E1112 and ISO 80601 for electronic patient thermometers.

The measurement resolution is 0.01 °C, while the absolute accuracy is astounding at ±0.1 °C over the temperature range of -20 to +50 °C without calibration.

The sensor units are 100% tested in a production facility that is traceable to NIST and verified with equipment calibrated to ISO/IEC 17025 accredited standards.

Networkable with Victron Energy

You can also integrate the RuuviTag sensors into your system via the Victron Energy GX devices such as Cerbo GX* or the MultiPlus GX* and view the data anywhere via the VRM Monitoring Portal. Now also on your mobile phone via the VRM widget.

With the Cerbo GX you can also control relays based on temperature.

Let your imagination run wild and measure almost anything at home, at work or during your hobbies.

- Temperature units (Ruuvi-Station App) - Celsius, Fahrenheit, Kelvin
- Humidity units (Ruuvi-Station App) - Relative humidity, absolute humidity, dew point

- Temperature sensor accuracy - Typical absolute accuracy ±0.1 °C, output resolution 0.01 °C
- Humidity sensor accuracy - Typical absolute accuracy ±2 %, 20...80 %, 25 °C

- Certifications - CE, FCC, ISED, TELEC, IFETEL, NOM, RTCA DO-160, RoHS, IP67, IP68, IP69K

* NOTE: The Bluetooth of the Cerbo GX is not reliable enough to work with the Ruuvi sensors. If you install Ruuvi sensors, you must therefore install a Bluetooth USB adapter. Information and adapters can be found here. The following USB Bluetooth adapters work, but we do not sell them.

- Logilink BT0037
- TP-Link UB400(UN)
- Ewent EW1085R4
- Laird BT820
- Laird BT851

All tested from -17 to 70C.

Ruuvi Station App

Ruuvi Station collects temperature, relative humidity, air pressure, signal strength (RSSI) and movement data from all RuuviTag devices in the vicinity and displays this data in real time. With the Ruuvi Station you can manage your RuuviTag devices, change background photos and visualise the collected weather data.