Clamp multimeter AC/DC 588D
Multimeter with current clamp meter
- 600A measuring range, AC/DC, frequency, etc.
- compact and handy, incl. bag
- integrated LED lamp
AC/DC clamp multimeter
Features:
True Root Mean Square (TRMS)
Data hold function
Automatic range selection
Relative value measurement
Sampling rate: 2 measurements per second
NCV measurement (non-contact voltage detection)
Phase tester function (LINE)
Integrated LED work light (for current measurement)
Automatic switch-off after 15 minutes
Low battery indicator
Complies with the IEC/EN 61010-1 safety standard
Category: CAT III 600 V
Measuring ranges:
Alternating current: 40/400/600 A (± 2.5 % + 10 digits)
Direct current: 40/400/600 A (± 2.5 % + 10 digits)
Direct voltage: 400 mV (± 0.5 % + 3 digits), 4 V/40 V/400 V (± 0.8 % + 5 digits), 600 V (± 1.0 % + 5 digits)
Alternating voltage: 400 mV (± 0.8 % + 3 digits), 4 V/40 V/400 V (± 1.0 % + 5 digits), 600 V (± 1.2 % + 5 digits)
Resistance: 400 Ω (± 1.0 % + 10 digits), 4 kΩ/40 kΩ/400 kΩ/4 MΩ (± 0.8 % + 5 digits), 40 MΩ (± 2.0 % + 10 digits)
Temperature: -20...0 °C / 0...50 °F (± 5 % + 4 digits), 0...400 °C / 50...750 °F (± 2 % + 3 digits), 400...1000 °C / 750...1800 °F (± 3 % + 3 digits)
Frequency: 10 Hz/100 Hz/1 kHz/10 kHz/100 kHz/1 MHz/10 MHz (± 0.5 % + 2 digits)
Duty cycle measurement: 0.1...99.9 % (± 2.0 % + 5 digits)
Capacitance: 10 nF (± 4 % + 25 digits), 100 nF/1 µF/10 µF/100 µF (± 4 % + 15 digits), 1 mF/10 mF (± 5 % + 25 digits)
Acoustic continuity tester (
Diode test: 3.2 V-
Technical data:
Operation via 3 micro batteries (not included)
Maximum permissible voltage: 600 V-/~(CAT III)
Display: 3 3/4 digits, 4000 counter units, switchable illumination
Clamp opening: max. 23 mm
Operating temperature: 0...40 °C (
Storage temperature: -10...60 °C (
Weight: approx. 205 g (without batteries)
Dimensions (LxWxH): 204x70x33 mm
Scope of delivery:
Clamp multimeter HONEYTEK HK588D
Test leads
Temperature probe (for measurements up to 400 °C)
Storage bag
Instruction manual