Booster Sterlingpower / Battery to Battery Charger 24V 30A

Device is new and in original packaging, but without warranty.

BB2430 - Sterling Power Booster

IUoUoU- 5-stage charging technology

The 5-stage charging technology guarantees maximum and gentle charging within the shortest possible charging times. The automatic calculation of the equalisation charging time determines the total charging cycle.

Current limitation (all B2Bs!!)

The built-in current limiter ensures that only the maximum possible current (depending on the device type) can flow between the batteries. In the event of overheating, the current is automatically reduced further.

Discharge protection (all B2Bs!!)

The device is designed so that it is not possible to discharge the source battery. Only at a voltage of > 13.3V (26.6V) does the device start to utilise the excess current (charge). This guarantees that the source battery (z.B. starter) is not discharged.

Automatic activation / standby mode

The B2B activates automatically as soon as a voltage of > 13.3V (26.6V) is detected. If the voltage drops below 13.0V (26.0V), the device goes into sleep mode and monitors the input voltage. The device then only consumes

Variable fan speed

To reduce noise, the fan runs at a variable speed depending on the current current and temperature.

No warranty problems (all B2Bs!!)

Because the B2B is not connected to the main charging system and because the alternator is not modified, there are no problems or breaches of the engine manufacturer's warranty. There is no interference with the engine management or engine charging system.

B2B - the solution for motor vehicles

Today's modern control systems prohibit any intervention or modification in the charging system. The vehicle's control system would immediately recognise a fault. This is not a problem when using a B2B, as the original system is not modified.