AC/DC clamp multimeter

Features:

True Root Mean Square (TRMS)

Data hold function

Automatic range selection

Relative value measurement

Sampling rate: 2 measurements per second

NCV measurement (non-contact voltage detection)

Phase tester function (LINE)

Integrated LED work light (for current measurement)

Automatic switch-off after 15 minutes

Low battery indicator

Complies with the IEC/EN 61010-1 safety standard

Category: CAT III 600 V

Measuring ranges:

Alternating current: 40/400/600 A (± 2.5 % + 10 digits)

Direct current: 40/400/600 A (± 2.5 % + 10 digits)

Direct voltage: 400 mV (± 0.5 % + 3 digits), 4 V/40 V/400 V (± 0.8 % + 5 digits), 600 V (± 1.0 % + 5 digits)

Alternating voltage: 400 mV (± 0.8 % + 3 digits), 4 V/40 V/400 V (± 1.0 % + 5 digits), 600 V (± 1.2 % + 5 digits)

Resistance: 400 Ω (± 1.0 % + 10 digits), 4 kΩ/40 kΩ/400 kΩ/4 MΩ (± 0.8 % + 5 digits), 40 MΩ (± 2.0 % + 10 digits)

Temperature: -20...0 °C / 0...50 °F (± 5 % + 4 digits), 0...400 °C / 50...750 °F (± 2 % + 3 digits), 400...1000 °C / 750...1800 °F (± 3 % + 3 digits)

Frequency: 10 Hz/100 Hz/1 kHz/10 kHz/100 kHz/1 MHz/10 MHz (± 0.5 % + 2 digits)

Duty cycle measurement: 0.1...99.9 % (± 2.0 % + 5 digits)

Capacitance: 10 nF (± 4 % + 25 digits), 100 nF/1 µF/10 µF/100 µF (± 4 % + 15 digits), 1 mF/10 mF (± 5 % + 25 digits)

Acoustic continuity tester (

Diode test: 3.2 V-

Technical data:

Operation via 3 micro batteries (not included)

Maximum permissible voltage: 600 V-/~(CAT III)

Display: 3 3/4 digits, 4000 counter units, switchable illumination

Clamp opening: max. 23 mm

Operating temperature: 0...40 °C (

Storage temperature: -10...60 °C (

Weight: approx. 205 g (without batteries)

Dimensions (LxWxH): 204x70x33 mm

Scope of delivery:

Clamp multimeter HONEYTEK HK588D

Test leads

Temperature probe (for measurements up to 400 °C)

Storage bag

Instruction manual