Quattro 24/3000/70-50/50
QUA243020010
Inverter & charger combi unit 3000VA with generator input
- Battery sp. 24V, inverter 2400W (6000W), charger 70Amp,
- autom. 230V switching, Power Assist, Gen. Input, Charge Start Bat. 4A
- VE.Bus interface for system integration, 3 prog. relays, 2 AUX IN
Zubehör / Gebühr
Bedienpanele
Systemintegration
Installation
Quattro 24/3000/70-50/50
Similar to the MultiPlus, the Quattro is also a combination of inverter and charger. It can also accept two AC inputs and automatically connect to the active source. This elegant solution offers numerous functions such as a true sine wave inverter, an adaptive charging function, Hybrid PowerAssist technology and several system integration options: for example, three-phase or split-phase operation as well as parallel operation.
Models: 3000VA, 5000VA, 8000VA, 10000VA, 15000VA
Two AC inputs & two AC outputs
The Quattro can be connected to two independent AC sources: for example to shore power and a generator or to two generators. The Quattro automatically connects to the active source. The main output ensures uninterrupted operation. If a power failure occurs or the connection to the shore or generator power is interrupted, the Quattro takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power if alternating current is available at one of the Quattro's inputs. Consumers that must not discharge the battery, such as an air conditioning system or a water heater, can be connected to this output.
Unique PowerAssist function
The Quattro prevents a limited AC power source, such as a generator or shore power connection, from being overloaded. Firstly, the charging process of the battery is automatically reduced to protect against overloading. Next, the output of a generator or shore power supply is boosted with energy from the battery.
Virtually unlimited power thanks to parallel connection
Up to six Quattros can be connected in parallel for high power requirements. Three-phase or split-phase operation is also possible. Please refer to our data sheets to find out which models are suitable for parallel, three-phase and split-phase operation.
Remote monitoring and control
In conjunction with a GX device (z.B. Cerbo GX), you can use the free VRM app and Free VRM Portal website to monitor and control your Quattro and the system or systems locally (LAN) or remotely via the internet from anywhere in the world. Access can be via a phone, tablet, laptop or PC with a wide range of operating systems. There is no end to the control options, from setting up your Quattro to automatically starting a backup generator and more..."
QUA243020010
Data sheet
- Input voltage
- 187-265 VAC
- Output voltage
- 230 VAC
- Battery voltage
- 24V
- Charging current
- 70A
- Loading algorithm
- mehrstufig, adaptiv
- Inverter power (25°) W
- 2400W
- Inverter power peak
- 6000W
- Transfer switch
- 2x 50A
- Charging current Start Bat.
- 4A
- Protection class IP
- IP 21
- Interface
- VE.Bus
- Parallel / 3 phase
- JA
- Dimension
- 362 x 258 x 218
- Weight
- 19kg
- PowerAssist - min. shore power
- Recommended battery capacity
- 200 - 700Ah
- Recommended protection
- 300A
- Recommended cable cross-section
- 0-5m 50mm2 - 5-10m 95mm2
- Regenerative power supply capable (ESS) Switzerland ?
- externe Anti Insel Schaltung (ENS) notwendig
You might also like
Inverter & charger combi unit 3000VA with generator input
- Battery sp. 24V, inverter 2400W (6000W), charger 70Amp,
- autom. 230V switching, Power Assist, Gen. Input, Charge Start Bat. 4A
- VE.Bus interface for system integration, 3 prog. relays, 2 AUX IN