• New

Inverter 24/1600 230V VE.Direct SCHUKO

PIN242121200

24V 1600VA Inverter, Pure Sine Wave 230V

- Battery voltage: 24V, power: 1450W, peak power: 2100W
- Efficiency: 91%, dynamic shutdown
- VE.Direct for system integration (Bluetooth available as an accessory)

CHF274.00
excl. VAT.
CHF296.19 incl. VAT.
favorite_border Add to wishlist

Available immediately - 1-2 days*
Stock: 1 Pcs.
In the inflow: 0 Pcs.
Lieferzeit: 1-5 Werktage

Victron 24/1600 230V Inverter VE.Direct Schuko

The Victron Inverter 24/1600 is a standalone inverter for 24-V battery systems. It produces a stable 230-V output voltage and is suitable for powering compatible AC loads in RVs, adventure vehicles, boats, mobile workshops, and stationary off-grid systems.

At 25 °C 1,450 W continuous power available. At 40 °C, the continuous power output is 1,300 W. For short periods, the unit delivers 2,100 W for 15 seconds, thereby supporting loads with high startup power requirements.

The Main Benefits

  • 24 V DC to 230 V AC: Powering suitable electrical loads from a 24-V battery.
  • 1,450 W continuous power: verified value at 25 °C, rather than a misleading equating of the model designation with watts.
  • 2,100 W peak power: available for up to 15 seconds.
  • VE.Direct: Configuration and monitoring via VictronConnect or integration into compatible Victron monitoring systems.
  • ECO Mode: Reduces self-consumption when there is no load or a very light load.
  • Remote On/Off Connection: Allows control via an external switch, a suitable BMS, or compatible accessories.

Suitable Applications

The inverter is designed for systems that already have a suitable 24-V battery. Typical applications include:

  • RV, expedition, and utility vehicles with a 24-volt electrical system
  • Boats and yachts with a dry, sheltered installation location
  • Allotment gardens, mountain pastures, alpine huts, and other isolated settlements
  • Mobile Workshops and Service Vehicles
  • Off-grid solar power systems with a 24-V battery bank

Whether a particular load is suitable depends on its continuous power rating, inrush current, and ambient temperature. Devices with motors, compressors, or power supplies may require significantly more power at startup than during normal operation.


VE.Direct and VictronConnect

About VE.Direct Among other things, you can monitor battery voltage, output voltage, load, operating status, as well as warnings and alarms. Output voltage, frequency, ECO mode, and relevant shutdown and restart thresholds can be configured using VictronConnect.

Important: Bluetooth is not built-in. For a wireless connection to VictronConnect, a separately available VE.Direct A Bluetooth Smart dongle is required. Alternatively, a connection via a VE.Direct-zu-USB-Schnittstelle possible.

ECO Mode for Lower Power Consumption

In normal idle mode, the 24/1600 consumes about 14 W. In ECO mode, this figure drops to about 2 W. The inverter checks at adjustable intervals to see if there is sufficient load again and then automatically resumes normal operation.

ECO mode is particularly useful for battery-based off-grid systems. However, very small or intermittent loads must be taken into account when setting the activation threshold.

Schuko Outlet and System Limits

This model features a CEE 7/4 Schuko output receptacle. Before connecting, verify that the plug, adapter, and the appliance’s safety features are suitable for the specific Swiss application.

Not a combination unit: The inverter does not have a battery charger or a built-in automatic AC transfer switch. A suitable external transfer switch or an inverter/charger is required for automatic switching between two AC power sources.

Technical Specifications

Manufacturer Reference PIN242161200
Battery Rated Voltage 24 V DC
DC Input Voltage Range 18.4–34 V
Continuous power at 25 °C 1,450 W
Continuous power at 40 °C 1,300 W
Time-Limited Benefit 1,600 W for 1 hour during a cold start
Top Performance 2,100 W for 15 seconds
AC Output 230 V AC ± 3%, Schuko CEE 7/4
Frequency 50 or 60 Hz ± 0.1%, adjustable
Maximum Efficiency 91%
Idle Fuel Consumption / ECO Mode 14 W / 2 W
Interface VE.Direct; Bluetooth only with an optional dongle
Battery connection Screw terminals, maximum 25 mm²
Internal fuse 150 A, 32 V, MIDI; replaceable
Protection Class IP21 when mounted on a base as recommended
Operating temperature −40 to +65 °C; reduced performance above 40 °C
Dimensions (H × W × D) 117 × 231 × 365 mm
Weight 8.9 kg

Installation Instructions

Victron specifies a battery cable cross-sectional area of 16 mm² for the 24/1600 with cable lengths up to 1.5 m and 25 mm² for lengths between 1.5 and 3 m. According to the manual, if battery cables are longer than 1.5 m, an additional fuse or DC circuit breaker must be installed near the battery.

Installation: Cable cross-section, DC fuses, grounding, neutral-to-ground connection, and ground-fault protection must be tailored to the overall system and local regulations. The AC output must never be connected directly to another AC power source. Refer to the Victron manual and, if necessary, have the installation performed by a qualified professional.

Conclusion

The Victron 24/1600 inverter is an ideal solution for reliably supplying 230 V from a 24-V battery to loads with a continuous power rating of up to 1,450 W. VE.Direct, ECO mode and remote control capabilities facilitate integration into mobile and stationary off-grid systems.


Frequently Asked Questions About the Victron 24/1600 Inverter

  • Does the Victron 24/1600 inverter deliver 1,600 W continuously?


    No. The continuous power is 1,450 W at 25 °C and 1,300 W at 40 °C. 1,600 W is available for a limited time—one hour—during a cold start; the peak power is 2,100 W for 15 seconds.

  • Is Bluetooth already built in?


    No. For a wireless connection with VictronConnect, the separately available VE.Direct Bluetooth Smart Dongle required.

  • Can the inverter charge a 24-V battery?


    No. This is a pure inverter without a charger. To charge the battery, you'll need a separate charger, a solar charge controller, or a compatible inverter/charger.

  • Does the device have an automatic power source switch?


    No. An automatic AC transfer switch is not built in. Automatic switching requires a suitable external device, such as the Victron Filax 2 or an inverter/charger.

  • Is the Schuko outlet suitable for use in Switzerland?


    The device has a CEE 7/4 Schuko Outlet, not a Swiss Type 13 outlet. The compatibility of the appliance plug, as well as any adapters that may be required, must be checked for the specific application.

  • Can the inverter be powered by a lithium battery?


    Operation is possible with a suitable 24-V battery system, provided that the voltage range, load capacity, wiring, and protection concept are compatible. A compatible BMS can control the inverter via the remote on/off connection. The specifications provided by the battery and inverter manufacturers must be followed.

PIN242121200

Data sheet

Output voltage
230 VAC
Battery voltage
24V
Connections
Open ends 35mm2
Inverter power (25°) W
1450W
Inverter power 1hour
1600W
Inverter power peak
2100W
Interface
VE.Direct
Protection
100A internal
Output
Schuko
Dimension
117 x 232 x 362
Weight
8.9kg
Recommended cable cross-section
Manufacturer data sheet & operating instructions

Specific References

EAN13
8719076056096

You might also like