
New products 2026
Lithium SuperPack NG batteries
- integrated BMS -
- integrated battery monitor -
- integrated heating -
- ON / OFF switch -
- Bluetooth to Victron Connect -
- alarm connection -
- CAN option series will follow later -

12V 100Ah & 200Ah
24V 100Ah & 200Ah
48V 100Ah
Featured products
Self-sufficient ESS lithium battery 51.2V - 6400Wh
48V Lithium battery 125Ah, heater & CAN-BMS port
- Battery voltage 51.2V, 125Ah (6400Wh), 58.5kg
- Charge max. 125A, discharge 125A / 200A 10min / 600A (start)
- Internal BMS, CAN-BMS to Victron, M8 terminal, display opt.
- 650x360x210mm, heater 220W, IP67, 24x parallel
Self-sufficient ESS lithium battery 51.2V - 125Ah - 6400Wh
With the self-sufficient ESS lithium battery 51.2V - 125Ah, we are completing our range of 48V storage systems.
This battery communicates directly with a Victron system (GX device) and has a high capacity per unit.
It does not require any additional BMS wiring on a Victron system with a GX device.
A MultiPlus 48/5000 can be operated from one battery without any problems. In combination with a MultiPlus, a storage solution can be realized with only 2 main components. With solar panels and an Easysolar, a solar energy storage system can be realized with 3 main components.
In tiny houses, a reliable solar storage system can be realized with just a few components that fits into a small space.
Including feed-back into the public grid.
The battery is also suitable for use with electric boat drives. In parallel operation, a large storage system is created plug and play. Up to 24 units can be connected in parallel, up to 4 units can be stacked on top of each other.
The integrated 220W heater also allows operation / charging at low temperatures. Ideal for self-sufficient applications in the mountains or on vehicles.
Two potential-free contacts allow the switching of external charging units such as alternator regulators.
In order to ensure simple installation, we have opted for M8 connection terminals and not the BPC connectors as shown in the pictures.
The battery is housed in a steel casing and can therefore withstand harsh conditions. It can be securely mounted with the supplied frame and tension straps.
Scope of delivery:
- Lithium storage 51.2V - 125Ah
- 2m CAN BMS cable to Victron GX
- parallel cable 0.3m
- bottom / top frame with 2 tensioning straps per battery
- center frame for 2+ batteries
Example system with Easysolar:

Data sheet
- Battery voltage
- 51.2V
- Capacity / Ah
- 125AH
- Charging current
- 30A / 125A max.
- Discharge current
- 125A / 200A 10min / 600A Start
- Connections
- M8
- Battery length (mm)
- 650mm
- Battery width (mm)
- 360mm
- Battery height (mm)
- 210mm
- Protection class IP
- IP 67
- Interface
- CAN-BMS / RS485
- Feature
- BMS cable length: 2m
- Feature
- Two potential-free contacts to control the charging of alternators
- Feature
- Heater with 220W
- Weight
- 11.6kg
- Battery chemistry
- LFP
- Charging voltage Bulk / Absorption
- 57.6V with DVCC
- Charging voltage Float
- 56V with DVCC
- Absorption time
- min. 1 hour depending on application 2 hours
- Charging temperature (°C)
- 0°C to 55°C
- Discharge temperature (°C)
- -20°C to 60°C
- Guarantee
- 2 years
- Cell type
- Prismatic cell
- Note
- no Bluetooth for APP
- Scope of delivery
- Parallel cable, CAN BMS cable to Victron GX, mounting frame and tensioning straps incl.
- Installation
- The battery must be installed in an upright position!
- Certificates
- UN38.3 / MSDS / CE
- System voltage
- 48V
Specific References
- EAN13
- 7350096344575
- MPN
- RAY-E48125ESS-He01



