Temperature, humidity & motion industrial sensor - IP67

- Bluetooth sensor, button battery 1-2 years
- Temperature -40 - 85°, humidity, 78 x 15mm
- Ruuvi App or Victron GX monitoring

MC4 Y-connector pair

- Original MC4, 1xM-2F/1xF-2M
- Solar Y parallel plug / coupling
- UV-resistant, can be unlocked with a tool

MPPT solar charge controller 20Amp.

- Battery voltage 12-48V, charging current 20Amp, PV voltage up to 100V
- Efficiency: 98%, customisable charging characteristic & load output 20Amp
- VE.Direct interface for system integration, Bluetooth

Temperature sensor

- for MultiPlus, Quattro, Sylla-TG and Skylla-i
- Compatible GX devices (Cerbo, Venus GX, etc)
- not for BMV

LiFePO4 Battery 12,8V 160Ah

- Battery voltage: 12.8V, 160Ah (25°)
- 18kg, M8 connection, internal cell equalisation and monitoring.
- external BMS required, Bluetooth

Battery monitoring without display 500A

- Battery voltage 6.5-70VDC, 500Amp
- Battery capacity 1- 9999Ah, starter battery monitoring
- VE.Direct Interface for system integration, Bluetooth

AUTARKING - Solar bag 150W

- Power 150Wp
- folded: 31 x 31cm
- only 5kg heavy

- Original Stäubli Multi Contact MC4 (PV-ST01)

- Original Stäubli Multi Contact MC4 (PV-ST01)

AGM battery 110Ah

- Battery voltage 12V, capacity 110Ah (C20), CCA 650
- 32kg, plate pole,
- 600 cycles 50%, 400 cycles 80%

Ve.Direct Cable 1x 90° plug - 1.8m

- for connecting BMV-7xx & MPPT solar controller
to GX devices
- Cable length: 1.8m, with 1x 90° plug

MEGA fuse holder

- Battery voltage up to 58V
- Fastening M8
- Hole spacing 50.8mm

MEGA fuse 125Amp

- Battery voltage up to 58V, fuse protection 125Amp
- Fastening M8, hole spacing 50.8mm
- 1 piece

4-way distributor plus & minus for MEGA fuses

- System voltage 12-48V, maximum current 1000A
- M8 connections, for 4 MEGA fuses
- Connection of plus & minus, with cover cap,
- suitable for Lynx BMS 500

Lithium battery 12.8V 300Ah - ATTENTION DIMENSIONS

- Battery voltage 12.8V, capacity 300Ah, 35kg
- internal BMS with Bluetooth, heating
- charge max. 200A, discharge max. 200A / 400A (3s)
- does not fit under the Ducato seat!!!

Solar module semi-flexible 160Wp

- Battery voltage 12V, output 160Wp
- Efficiency: ~23%, 3.5kg, IP67, 3m 2x1.5mm2 cable
- 1460 x 540 x 4.3mm (25mm)

Solar panel mounting Z-profile - 100mm

- UV and weather resistant
- aluminium, 15-year guarantee
- 100 x 48 x 27mm (23mm side length)
- with 4 screws

Tank sensor for Cerbo GX - 28cm

- Resistance sensor 10/180Ohm
suitable for Victron Cerbo GX
- shaft length 28cm,
- 5 hole mounting flange 69 / 38mm

Cable lug crimping for equipotential bonding cable

- if you wish to have a 16mm2 M8 cable lug pressed on
- incl. cable lug 16mm2 M8 and heat-shrink tubing sw
- select for each pressing (leave instructions in order)

Solar module monocrystalline PERC 440Wp

- Batsp. 12-24V, power 440Wp, shingle technology
- 21,2kg, 1.2m cable with MC4 compatible plug
- 1812 x 1096 x 30mm

LiFePO4 Battery 12.8V 340Ah

- Battery voltage: 12.8V, 340Ah (25°)
- 33kg, connection 4x M8, int. cell equalisation with BMS.
- external relay & battery monitor required

Solar outdoor junction box - 5m

- SAE external socket, open ends with cable end sleeves
- 6mm2 (10AWG) - 5m
- 4 screws INOX black, sealing cap

Balcony solar set 880Wp - for angular railing poles

- License-free grid inverter with 600W
- 2 MPPT trackers with 450Wp each
- 2x solar panels mono shingle 440Wp,
- 2x SolarHook balcony solar mounting set - Type_e
- 1x connection cable 230V 5m

MC4 solar connector crimping

- if MC4 plug is to be crimped onto cable

- select per crimping (leave instructions in order)

LiFePO4 Battery 12,8V 330Ah

- Battery voltage: 12.8V, 330Ah (25°)
- 30kg, M8 connection, internal cell equalisation and monitoring.
- external BMS required, Bluetooth

Solar module monocrystalline 140Wp

- Battery voltage 12V, power 140Wp
- 9kg, 0.9m cable with MC4
- 1250 x 668 x 30mm

LiFePO4 Super Pack 12.8V 100Ah (M8)

- Battery voltage: 12.8V, 100Ah (25°)
- 14kg, connection M8, int. BMS (without Bluetooth)
- discharge 100A, charge 100A

Avoid contact surge!

- Avoid sparking at the inverter/charger connection
- Extend the service life of the capacitors
- Protect the contact point from burning.

- Distribution point for DC direct current distribution
- black (minus), M8 screw
- clamping distance approx. 8.5mm

Solar module Monocrystalline 115Wp

- Battery voltage 12V, power 115Wp
- 8kg, 0.9m cable with MC4
- 1030 x 668 x 30mm