AC 3-phase electricity meter

- for AC alternating current measurement of
generators, consumers, PV or for ESS
- 3 phases, Ethernet interface, display

Crimp cable lug 25mm2 / M10

- 1 pack = 10 pcs.
- bare cable lugs (solderless)
- short sleeve shape

Crimp cable lug 16mm2 / M6

- 1 pack = 10 pcs.
- bare cable lugs (solderless)
- short sleeve shape

Residual current circuit breaker FI 13A, 30mA

- For protecting the sockets downstream of the inverter
- 1 width unit
- 13A, 30mA

Residual current circuit breaker FI 16A, 30mA

- For protecting the shore power input side
- 1 width unit
- 16A, 30mA

Sterling Power Double induction hob 2800W - longitudinal

- without high peak, 9 levels 830W (pulsing) - 1200W / 1600W
- especially for inverter with 2800W continuous power
- for fixed installation, lengthwise, without plug as 12Amp

Distributor rail 2 + 12

- System voltage up to 70V
- max. 250A
- Connections: 2 x 8mm (M14), 12 x 4.8mm
- with cover cap

Wall bracket for GX Touch Display 5 inch

- Mounting frame for wall mounting
- lateral cable version
- incl. 3 screws

for potential equalization of the solar panels

Solar cable set 6mm2

- 2 cables each with one MC4 plug & open ends
- double insulated made of halogen-free, cross-linked polyolefin
- UV & ozone resistant, cable length: 5m

12V charger 100 Amp.

- pre-programmed charging characteristics
- Protection: IP21, 1.5m DC cable, 1.5m AC cable
- Compact / with active cooling (fan)

24V charger Champ 20 Amp.

- fixed programmed charging characteristic
- Protection: IP67, 1.5m DC cable, 1.5m AC cable
- Power supply function - 27.4V

DC/DC charging booster 24/24V 12Amp

- Input voltage 24V, output voltage 24V, charging current 12Amp
- Customisable charging characteristic, remote control, motor run detection
- Bluetooth for programming and monitoring

Touch display for Cerbo GX

- High-resolution touch display
- 5 inch, resolution: 800 x 460
- HDMI & USB

Ve.Bus Smart Bluetooth interface

- to monitor operation
- ON / OFF / Charger only, set shore power limit
- Voltage and temperature sensor for charger

Battery monitor for monitoring the service battery

- Battery voltage 6.5 - 70VDC, shunt 500A
- incl. start battery, relay, SOC, V, A, Ah, TTG, history
- VE.Direct interface for system integration, Bluetooth

Orion-Tr 48/24-12 (280W)

- Input voltage 32-70V, output voltage 20-30V, charging current 12Amp
- Efficiency: 87%, adjustable output voltage
- Remote control possible via 2-pin remote connection

AGM battery 8Ah

- Battery voltage 12V, capacity 8Ah (C20),
- 2.5kg, 6.3mm connections,
- 600 cycles 50%, 400 cycles 80%

MPPT solar charge controller 35Amp.

- Battery voltage 12-48V, charging current 35Amp, PV voltage up to 150V
- Efficiency: 98%, customisable charging characteristic & load output 35Amp
- VE.Direct interface for system integration, (Bluetooth as accessory)

RS485 to USB converter

- For connecting a net meter to
a Cerbo GX
- 5m cable

RS485 to USB converter

- For connecting a netmeter to
a Cerbo GX
- 1.8m cable

Orion-Tr 24/12-20 (240W)

- Input voltage 16-35V, output voltage 10-15V, charging current 20Amp
- Efficiency: 87%, adjustable output voltage
- Remote control possible via 2-pin remote connection

Shore power socket 16A (MP16)

- IP56 protected,
- stainless steel, 3-pin
- no CEE plug!!!

Shore power cable 15m

- LED to indicate operation
- CEE shore side / MP16 feed side
- supplied in a fabric bag

Ve.Direct Cable 1x 90° plug - 0.3m

- for connecting BMV-7xx & MPPT solar controller
to GX devices
- Cable length: 0.3m, with 1x 90° plug

Ve.Direct Cable - 5m

- for connecting BMV-7xx & MPPT solar controller
to GX devices
- cable length: 5m

Ve.Direct Cable - 1.8m

- for connecting BMV-7xx & MPPT solar controller
to GX devices
- cable length: 1.8m

Network cable for VE.Can, VE.Bus - 3m

- Cable length: 3m

Skylla Control

- Status display
- Set charging current