- New
Victron MicroGrid
A modular approach to large,
flexible off-grid power systems
Featured products
LiFePO4 Battery 12,8V/200Ah NG
BAT512120620
LiFePO4 Battery 12,8V 200Ah - NG
- Next Generation - Digital
- Battery voltage: 12.8V, 200Ah (25°)
- 19kg, M8 connection, int. cell balancing and monitoring.
- external BMS required
- All data on GX devices, VictronConfig & VRM Portal
Accessories / Levy
VRG - prepaid recycling fee
|
VRG - Lithium, 16'001 - 19'000 gr. |
BMS components
Fusing
Accessories
Lithium battery 12.8V 200Ah - NG
The NG (Next Generation) series builds on the success of our Lithium Smart series and incorporates significant improvements.
Highlights:
- Numerous improvements, including the addition of cell voltage and temperature readings;
- Maximum single bank size increased to 385 kWh;
- Modules available in 12, 24 and 48V;
- IP65 protection rating;
- Cradle or strap mounting.
The lithium-NG batteries from Victron Energy are lithium iron phosphate batteries (LiFePO4 or LFP) and are available with a nominal voltage of 12.8V, 25.6V and 51.2V in various capacities. They can be connected in series, parallel and both series and parallel, allowing a battery bank to be assembled for system voltages of 12V, 24V or 48V.
The maximum number of batteries in a system is 50, resulting in a maximum energy storage of 192 kWh in a 12V system and up to 384kWh in a 24V and 48V system.
Victron lithium-NG batteries have an integrated cell balancing and cell monitoring function. The cables of the cell balancing/monitoring function can be linked together and must be connected to a battery management system (BMS).
Tasks of the battery management system (BMS)
1. trigger a pre-alarm when the voltage of a battery cell drops to less than 3.0 V.
2. disconnect or switch off the load when the voltage of a battery cell drops to less than 2.8 V.
3. stop the charging process when the voltage of a battery cell rises to more than 3.6 V or when the temperature becomes too high or too low.
Main features:
Integrated shunt
The battery data (battery voltage, current and temperature) is transmitted to the BMS where it is evaluated, i.e. to calculate the state of charge, which can then be read out via VictronConnect or a GX communication center, or to create and issue specific warnings and alarms.
Automatic setup, monitoring and control via VictronConnect app or a GX device
All battery parameters are automatically managed by the BMS. The BMS automatically detects the system voltage and the number of batteries in parallel, series and series/parallel connection. The BMS (Lynx Smart BMS NG 500 A / 1000 A, other models to follow) is mandatory and must be purchased separately.
Monitoring and control is carried out via VictronConnect (every BMS model has Bluetooth), a GX communication center or the VRM portal. You can view battery parameters such as cell status, battery voltages, current and temperatures in real time. The battery firmware is automatically updated by the BMS.
Easy bracket installation
Mounting brackets make installation easier and ensure that the battery is optimally secured against slipping and tipping over.
Increased environmental protection (IP65 classification)
The lithium NG batteries are effectively sealed against dust and can withstand a low-pressure water jet, making them suitable for environments where dust and water are a problem.
Low self-discharge rate
The self-discharge rate has been significantly improved and is now a maximum of 2% of the battery capacity per month. A low self-discharge rate contributes to the overall performance, longevity and reliability of NG batteries.
Requires one of these BMS:
All Victron Smart Lithium batteries require an external BMS. Without a BMS there is no warranty!!!
The BMS controls the charge (ATC) / discharge (ATD) based on the information from the battery.
This control is different depending on the BMS, but in all cases requires additional circuitry for charging / discharging.
The BMS options listed in the accessories are available .
With the NG batteries, two independent battery systems can also be linked together to form one battery system. In this way, redundancy can be achieved if one battery system fails.
If you have any further questions, please do not hesitate to contact us.
VictronConnect
With VictronConnect you can query live status information and configure all Victron products that either have a built-in Bluetooth function or are connected to a VE.Direct Bluetooth Smart Dongle.
BAT512120620
Data sheet
- Battery voltage
- 12.8V
- Capacity / Ah
- 200Ah
- Charging current
- 400A (recommended 100A)
- Discharge current
- 400A (recommended 200A)
- Connections
- M8
- Battery length (mm)
- 341mm
- Battery width (mm)
- 160mm
- Battery height (mm)
- 235mm
- Protection class IP
- IP 65
- Interface
- M8 Digital for Lynx BMS NG
- Feature
- requires external BMS
- Feature
- 50 batteries can be connected together. max. 5 BMS to one system
- Weight
- 19kg
- Operating life
- 80% discharge - 2500 cycles
- Operating life
- 50% discharge - 5000 cycles
- Battery chemistry
- LFP
- Charging voltage Bulk / Absorption
- 14.2V
- Charging voltage Float
- 13.5V
- Absorption time
- min. 1 hour depending on application 2 hours
- Charging temperature (°C)
- +5℃ to +50℃
- Discharge temperature (°C)
- -20°C to 50°C
- Guarantee
- 3 years
- Cell type
- Prismatic cell
- Installation
- Kann auf die lange oder kurze Seite gelegt, aber NICHT auf den Kopf montiert werden.
- Manufacturer data sheet & operating instructions
- https://www.victronenergy.de/batteries/lithium-battery-12-8v#datasheet
- BMS type
- Smart Lithium NG
Specific References
- EAN13
- 8719076058915
- MPN
- BAT512120620
LiFePO4 Battery 12,8V 200Ah - NG
- Next Generation - Digital
- Battery voltage: 12.8V, 200Ah (25°)
- 19kg, M8 connection, int. cell balancing and monitoring.
- external BMS required
- All data on GX devices, VictronConfig & VRM Portal