Maiensäss solar storage set

Use and store solar energy. Quite simply.

The solar energy storage set consists of the following components:

- Easysolar

The EasySolar combines an MPPT solar charge controller, an inverter/charger and a communication center in a single device. The device is easy to install and requires very little wiring.

The inverter operates all common loads (coffee machine, kettle, vacuum cleaner / hair dryer, water heater).
Of course, depending on the available energy from the battery or the sun and your consumer behavior.
The charger charges the batteries when the sky is overcast or supports the inverter in the event of high consumption from the shore power grid or a generator.

This system is also certified to feed excess solar power back into the public grid up to 600W without a permit, you just have to register this.

A boiler or other loads can be controlled depending on the battery status via a switchable 230V output.
This ensures that the solar power is used optimally.

The integrated communication center can connect your system to the Internet, so monitoring and alarms are possible at any time and from anywhere via the Victron VRM portal.
An Internet connection can also be made for service purposes only.

The integrated Wifi allows full control of the system at all times. A small display on the device shows basic data.


More complex requirements can also be implemented; if necessary, we recommend a different basic device.

- Energy storage Autarking 24V 120Ah / 3000Wh battery

In addition to the 3000Wh storage system, this battery also includes the battery management system and the battery monitor, and communicates directly with the EasySolar. It stores electricity from the solar system or the shore power grid and, with a consumption of approx. 1300Wh / day, offers 2 days of self-sufficiency without sun or shore power / generator power.

- Solar system 900Wp

The solar system supplies energy to charge the battery and / or for current consumption. In summer with full sun (45°, south-facing) it supplies between 3000 and 4000Wh of energy depending on the location. This corresponds to approx. 3150Wh charging power.

- Energy consumption & yield

With a consumption per 24 hours of approx. 650Wh / 25V -> 26Ah, the solar system normally supplies enough energy to cover your daily consumption and recharge the battery. On sunny days, a kettle can also be operated.

An individual calculation can provide clarity here.

Specifications:

- Easysolar 24V - 3000VA - 70Amp - 2000Wp
- Battery AUTARKING Lifepo 25.5V 120Ah
- Battery monitor SmartShunt incl. 1.8m data cable
- Solar panels 2x 450Wp monocrystalline, bifacial (+2 panels in string possible)
- Solar cable 10m 1 string
- Battery cable 1.5m, fuse protection DC & AC Fi 16A, main switch
- Settings and brief training, block diagram

Note on the scope of delivery:

This set only consists of the components listed above.

No components are included for the installation of the solar panels on the roof.
This is too individual, please discuss this with your roofer or local solar installer.
We offer mounting sets for 2 panels as accessories


Please note that installation may generally only be carried out by an electrician.

If necessary, it also makes sense to analyze your energy requirements and your wishes during a consultation.

If you would like to integrate this set into your existing electrical system, we can help you with this or instruct your electrician.