LiFePO4 Battery 12,8V 50Ah

- Battery voltage: 12.8V, 50Ah (25°)
- 7kg, M8 connection, internal cell equalisation and monitoring.
- external BMS required, Bluetooth

LiFePO4 Battery 25,6V 100Ah

- Battery voltage: 25.6V, 100Ah (25°)
- 15kg, M8 connection, internal cell equalisation and monitoring.
- external BMS required, Bluetooth

Inverter & charger combi unit 5000VA / MPPT solar charge controller

- Battery pack 48V, inverter 4000W (9000W), charger 70Amp,
- MPPT solar charge controller 250V / 100Amp (5800W)
- GX device integrated, various interfaces for system integration
- no connection for a display

Rubber cover, suitable for the following IP65 chargers:

- 12V/25A and 24V/13A
- Protects your IP65 charger from damage
- Hook to hang up the charger

MC4 Y-connector pair

- Original MC4, 1xM-2F/1xF-2M
- Solar Y parallel plug / coupling
- UV-resistant, can be unlocked with a tool

Wall bracket, suitable for the following IP65 chargers:

- 12V/25A, 24V/13A
- creates order at the workplace
- practical storage for IP65 chargers

Transport box suitable for the following IP65 chargers:

- 12V/25A, 24V/13A
- for IP65 chargers and accessories
- Waterproof plastic box

Distributor rail 2 + 10

- System voltage up to 70V
- max. 150A
- Connections: 2 x 6.35mm, 10 x 4.2mm
- with cover cap

Distributor rail 2 + 20

- System voltage up to 70V
- max. 150A
- Connections: 2 x 6.35mm, 20 x 4.2mm
- with cover cap

Distributor rail 2 + 12

- System voltage up to 70V
- max. 250A
- Connections: 2 x 8mm (M14), 12 x 4.8mm
- with cover cap

- (Smart) MPPT 100/30-50 & 150/35,
- Orion (Smart)220/240/280/360/400W

- (Smart) MPPT 75/10, 75/15, 100/15,
- Orion 110/120WW

12V charger 25A with 1 output

- 5-stage charging algorithm, charging current 25Amp
- efficiency: 93%, customisable charging curve
- waterproof and shockproof, Bluetooth

Assembly and release spanner - plastic

- For tightening and loosening the cable gland
and for releasing the locking mechanism of the MC4 plug connection.

Sterling Power 1500W Induction Cooktop

- No high peak, 8 levels at 830W (pulsed) - 1400W
- Specifically designed for inverters with 1600W continuous power
- Start power 1050W, adjustable up and down
- Portable, diameter: 260mm

- For mounting the Super-B Nomada 105Ah battery
- Length: 8.5cm
- Holes: 2x 8mm and 2x 4mm

- For mounting a Super-B Nomada 105Ah battery bank
- Length: 36cm
- Holes: 4x 8mm and 5x 4mm

LTE modem & GPS add-on device for GX devices

- for connecting GX devices to the VRM portal
- 8-70VDC power supply
- incl. LTE antenna (SIM card required)
- connection for GPS antenna (not included)

Sterling Power Double induction hob 2800W - transverse

- without high peak, 2x 9 levels 830 (pulsing) - 1500W
- especially for inverters with 2800W continuous power
- for fixed installation, transverse, without plug as 12Amp

Sterling Power Double induction hob 2800W - longitudinal

- without high peak, 9 levels 830W (pulsing) - 1200W / 1600W
- especially for inverter with 2800W continuous power
- for fixed installation, lengthwise, without plug as 12Amp

Housing for residual current circuit-breaker FI / LS

- for 4 width units
- neutral conductor & earth bar
- IP65, small version

Residual current circuit breaker FI 16A, 30mA

- For protecting the shore power input side
- 1 width unit
- 16A, 30mA

Housing for residual current circuit-breaker FI / LS

- for 9 width units
- with FIXCONNECT® N and PE terminal
- 35mm DIN rail, IP65

Residual current circuit breaker FI 13A, 30mA

- For protecting the sockets downstream of the inverter
- 1 width unit
- 13A, 30mA

MC4 solar connector crimping

- if MC4 plug is to be crimped onto cable

- select per crimping (leave instructions in order)

GX Tank 140 Interface

- 4 tank level sensors, 4-20mA / 0-10V
- for connection to Cerbo GX
- upper and lower limit values adjustable

AC 3-phase electricity meter

- for AC alternating current measurement of
generators, consumers, PV or for ESS
- 3 phases, Ethernet interface, display

AC 3-phase electricity meter

- for AC alternating current measurement of
generators, consumers, PV or for ESS
- 3 phase, RJ485 interface

RS485 to Zigbee converter & transceiver

- For wireless connection of a netmeter
to a Cerbo GX, requires counterpart
- Transmits, receives and converts the Zigbee signal

USB to Zigbee converter & transceiver

- For wireless connection of a netmeter
to a Cerbo GX, requires counterpart
- Transmits, receives and converts the Zigbee signal