Victron MicroGrid
A modular approach to large,
flexible off-grid power systems
Featured products
EasySolar-II 48/3000/35-32 MPPT 250/70 GX
PMP482307010
Inverter & charger combi unit 3000VA / MPPT solar charge controller
- Battery pack 48V, inverter 2400W (5500W), charger 35Amp,
- MPPT solar charge controller 250V / 70Amp (4000W)
- GX device integrated, various interfaces for system integration
- no connection for a display!
Accessories / Levy
Controll panels
Extension
System integration
Installation
Programmierung
|
|
|
|
Interface MK3-USB (VE.Bus to USB) |
|
|
Interface MK3-USB (VE.Bus to USB-C) |
The complete solution for solar power
The Victron EasySolar-II GX integrates the following elements:
- A MultiPlus-II inverter/charger
- A SmartSolar MPPT-Tr solar charge controller
- A GX device with 2x 16 character display
These elements are pre-wired and integrated into a single unit. This greatly simplifies
most installations and saves time and money.
Display and Wi-Fi
The display shows parameters for the battery, inverter and solar charge controller.
The parameters can be accessed using a smartphone or other Wi-Fi enabled device
.
Wi-Fi can also be used to set up the system and change settings
.
Solar charge controller
The DC output of the SmartSolar MPPT is connected in parallel to the DC connection of the
MultiPlus-II inverter/charger.
The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device / module
The integrated GX device includes:
- A BMS-Can interface. This can be used to connect to a compatible
battery managed via the CAN bus. Note that this is not a
VE.Can compatible port.
- A USB port
- An Ethernet port
- An Ethernet port VE.Direct-Anschluss
The GX device controls the MultiPlus-II and the SmartSolar MPPT with one VE.Bus and one CAN bus each
VE.Direct-Verbindung.
PMP482307010
Data sheet
- Battery voltage
- 48V
- Charging current
- 35A
- Loading algorithm
- multi-stage, adaptive
- Nominal PV power 48V
- 4000W
- PV input voltage
- 250V
- Inverter power (25°) W
- 2400W
- Inverter power peak
- 5500W
- Transfer switch
- 32A
- Protection class IP
- IP 21
- Interface
- VE.bus
- Interface
- VE.Direct & Bluetooth
- Interface
- GX device various
- Interface
- USB
- Interface
- Wifi & Ethernet
- Interface
- CAN BMS for BMS batteries (BYD, Pylontech etc.)
- Parallel / 3 phase
- YES
- Dimension
- 499 x 268 x 237mm
- Weight
- 26kg
- Max. Solar current (A)
- 70A
- PowerAssist - min. shore power
- (FW 485) - min. 3A
- Regenerative power supply capable (ESS) Switzerland ?
- JA - ENS / Anti Insel Schutz integriert
- Note
- NO display can be connected to this device!!!
- Note
- Must be programmed for lithium batteries!
- Manufacturer data sheet & operating instructions
- https://www.victronenergy.de/inverter-charger-mppt/easysolar-ii-gx#datasheets
Specific References
- EAN13
- 8719076045786
You might also like
Inverter & charger combi unit 3000VA / MPPT solar charge controller
- Battery pack 48V, inverter 2400W (5500W), charger 35Amp,
- MPPT solar charge controller 250V / 70Amp (4000W)
- GX device integrated, various interfaces for system integration
- no connection for a display!