• -5%
  • New

TinyHouse WorkerSet 24/1600/40 - 1800Wp - 120Ah

AUTARKING-Tiny24V1

Tinyhouse Set Easy

- Bat.voltage 24V, inverter 1600VA (1300W), charger 40Amp,
- MPPT solar charge controller 100V / 50Amp (1400W), 230V AC fuses & FI,
- Solar panels 4x 450Wp,
- Battery storage: AUTARKING Philipp Lithium - 25.6V 120Ah

CHF2,925.00
CHF2,778.75 Save 5%
excl. VAT.
CHF3,003.83 incl. VAT.
favorite_border Add to wishlist

Delivery time from order approx. 10 working days
Stock: 0 Pcs.
In the inflow: 0 Pcs.

Work from the Tiny, the sun powers computer, Wifi & Co.



The TinyHouse Worker Set consists of the following components:


- Easysolar

The EasySolar combines an MPPT solar charge controller, an inverter/charger and inverter power distribution in a single device. The device is easy to install and requires very little wiring. The inverter operates all common loads (coffee machine, kettle, small vacuum cleaner / hair dryer)
Naturally depending on the available energy from the battery or the sun and your consumer behavior. The charger charges the batteries when the sky is overcast or supports the inverter during high consumption from the shore power grid or a generator.


- Energy storage AUTARKING Philipp lithium battery 25.6V - 120Ah (3000Wh)

The batteries store electricity from the solar system or the shore power grid. The Worker Set is designed so that you can work and live off-grid when the sun is shining. Self-sufficiency for longer periods is not the aim here, but can be achieved with an additional battery. With a lithium storage unit, you have a much higher cycle stability and power consumption capability, so the sun can quickly recharge the battery.

- Battery monitor

The battery monitor is integrated into the AUTARKING Phillip via Bluetooth and mobile app.
An additional monitor can be installed if required.

- Solar system 1800Wp

The solar system supplies energy to charge the battery and / or for current consumption. In summer with full sun (45°, south-facing) it supplies the "Worker" consumption and charges the batteries with almost 100% of their capacity.
This means that the battery can be easily recharged in one day after a rainy day.

- Energy consumption & yield

"Worker" consumption per 24 hours of approx. 1700Wh / 25V -> 70Ah
Energy yield 1400Wp x 4 (expected yield per day) = 5600Wh - 15% (loss of charge controller & battery) = approx. 4760Wh (25V - 190Ah)

However, this set is clearly not intended for longer self-sufficiency and should be operated on land.


Specifications:

- Easysolar 24V - 1600VA - 50Amp - 1400Wp
- Battery AUTARKING Philipp Lithium - 25.6V 120Ah
- Solar panels 4x 450Wp bifacial topcon half cell



Note on the scope of delivery:

This set only consists of the components listed above.
Cables, plugs, fuses, solar panel holders and installation material are not included.
The EasySolar has 1.5m 25mm2 DC connection cable included.
This is project / situation specific. However, we will be happy to advise you.

If necessary, it also makes sense to analyze your energy requirements and wishes during a consultation.


AUTARKING-Tiny24V1

Data sheet

Battery voltage
24V
Capacity / Ah
120Ah
Charging current
230V - 70A / Solar 50A
Loading algorithm
multi-stage, adaptive
Nominal PV power 24V
1400W
PV input voltage
100V
Panel power
2x260Wp
Connections
MC4
Connections
G-ST18i
Connections
1.5m 2x25mm2 with M8 ring cable lugs
Solar panel length (mm)
1956mm
Solar panel width (mm)
1134mm
Solar panel height (mm)
30mm
Inverter power (25°) W
1300W
Inverter power peak
2800W
Transfer switch
16A
Interface
VE.Direct
Interface
VE.bus
Feature
AC fuse protection- FI, 16A - 10A, 10A, 16A
Scope of delivery
Temperature sensor
Manufacturer data sheet & operating instructions
https://www.victronenergy.de/inverters-chargers/easysolar#datasheets
Manufacturer data sheet & operating instructions
https://manual.autarking.ch/#lithium
Manufacturer data sheet & operating instructions
https://www.victronenergy.de/solar-pv-panels/bluesolar-panels#datasheets

Specific References

MPN
PMP122120000

You might also like