Lithium SuperPack 12.8V/200Ah NG

- Battery voltage: 12.8V, 100Ah (25°)
- 400Amp discharge, 200Amp charge
- internal BMS & battery monitor, Victron Connect
- main switch, 130W heater, no series connection!
- 466 x 198 x 173mm, 20.5kg

Lithium SuperPack 25.6V/100Ah NG

- Battery voltage: 25.6V, 100Ah (25°)
- 200Amp discharge, 100Amp charge
- internal BMS & battery monitor, Victron Connect
- main switch, 130W heater, no series connection!
- 466 x 198 x 173mm, 20.5kg

Lithium battery 12.8V 180Ah with heater and CAN connections

- Battery voltage 12.8V, capacity 180Ah, 16.5kg
- internal BMS with Bluetooth & CAN connection
- 5 Amp active balancer and CAN connection
- charge max. 200A, discharge max. 200A / 220A (5s)
- under seat battery T6
- 355 x 175 x 190mm

Lithium SuperPack 25.6V/100Ah NG

- Battery voltage: 25.6V, 100Ah (25°)
- 200Amp discharge, 100Amp charge
- internal BMS & battery monitor, Victron Connect
- main switch, 130W heater, no series connection!
- 466 x 198 x 173mm, 20.5kg

48V Lithium battery 125Ah, heater & CAN-BMS port

- Battery voltage 51.2V, 125Ah (6400Wh), 58.5kg
- Charge max. 125A, discharge 125A / 200A 10min / 600A (start)
- Internal BMS, CAN-BMS to Victron, M8 terminal, display opt.
- 650x360x210mm, heater 220W, IP67, 18x parallel

- For mounting the Super-B Nomia battery
- Length:
- Holes:

Pole adapter M8 (plus & minus)

- screws must be shortened for AUTARKING batteries!

M8 round connector 3-pin - 1m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 1m, 2 pieces

M8 round connector 3-pin - 2m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 2m, 2 pieces

M8 round connector 3-pin - 3m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 3m, 2 pieces

M8 round connector 3-pin - 5m

- BMS extension cable for Victron Lithium Smart batteries
- M8 round plug male to female
- cable length: 5m, 2 pieces

Smart BMS 12V / 100Amp

- Vehicle charge limiter 100Amp, battery sp. 12V
- Outputs to control charge / discharge
- Remote, alarm contacts, Bluetooth, status LEDs

Small BMS Victron Lithium battery management

- controls charge / discharge relay (10mA / 1mA)
- pre-alarm relay & system ON / OFF
- no VE.Bus control

Super-B BDB 250 Relay for starter batteries

- External under- and overvoltage protection 12/24V
- Current consumption: 2mA
- Switching current: 250A (peak 1500A)

- For mounting the Super-B Nomada 105Ah battery
- Length: 8.5cm
- Holes: 2x 8mm and 2x 4mm

- For mounting a Super-B Nomada 105Ah battery bank
- Length: 36cm
- Holes: 4x 8mm and 5x 4mm

Replacement button for Peak Power Pack

- Button with LED & cable with 3.5mm plug
- 2m cable

Smart BMS 12V / 100A / 200A

- Vehicle charging limit 100Amp, system current 200Amp
- Outputs to control charging / discharging
- Remote, alarm contacts, Bluetooth, status LEDs

VE.BUS BMS v2 Victron Lithium Battery Management

- controls MultiPlus & Quattro's
- controls charge / discharge relay (30mA / 1A)
- pre-alarm relay & system ON / OFF, GX Power
- control of MPPT via Cerbo GX, MultiP On / OFF

Remote-controlled battery master switch / bistable relay

- System voltage: up to 60VDC, control voltage 12VDC bistable
- Current rating 500A (peak 1600A)
- 4 modes (bistable & relay)
- Incl. cable, buttons for ON/OFF standby
- Can be combined with link plates with TBS DC Modular

Remote-controlled battery master switch / bistable relay

- System voltage: up to 60VDC, control voltage 24VDC bistable
- Current rating 500A (peak 1600A)
- 4 modes (bistable & relay)
- Incl. cable, buttons for ON/OFF standby
- Can be combined with link plates with TBS DC Modular

Remote-controlled battery master switch / bistable relay

- System voltage: up to 60VDC, control voltage 48VDC bistable
- Current rating 350A (peak 1200A)
- 4 modes (bistable & relay)
- Incl. cable, buttons for ON/OFF standby
- Can be combined with link plates with TBS DC Modular

ON / OFF button for TBS bistable relay

- for remote control of TBS / Super-B relay
- current 14Vdc - 21A - 28Vdc - 15A
- button for ON/OFF standby - with LED

Battery mounting plate Epsilon 100 & 150Ah

- For mounting BCI 49 - DIN H8 / LN5 battery sizes
- Super-B Epsilon 100 & 150Ah batteries
- from Mastervolt MLI Ultra 12/1250 batteries

- Dimensions: 278 x 205 x 30mm
- 10 mounting holes, lockable from the side

Lynx Smart BMS for Victron lithium batteries

- Battery voltage 12-48V, max. current 1000A
- Battery monitor, BMS, main relay,
- Interface VE.Can (NMEA2000 capable), Bluetooth

4-way distributor plus & minus for MEGA fuses

- System voltage 12-48V, maximum current 1000A
- Connections M10, for 4 MEGA fuses
- Connection of plus & minus, with cover cap,
- suitable for Lynx BMS 1000

4-way distributor plus & minus without fuses

- System voltage 12-48V, maximum current 1000A
- Connections M10, without fuses
- Connection of plus & minus, with cover cap
- Suitable for Lynx BMS 1000

2-way distributor Class-T fuses plus & minus

- System voltage 12-48V, maximum current 1000A DC
- Connections M10, supplied without fuses
- Connection of plus & minus, with cover cap
- Suitable for Lynx BMS 1000, Lynx Distributor M10

Lynx Smart BMS for Victron Lithium NG batteries

- Battery voltage 12-48V, max. current 600A
- Battery monitor, BMS, main relay,
- Interface VE.Can (NMEA2000 capable), Bluetooth
- M10 Lynx system, for NG batteries