- (Smart) MPPT 75/10, 75/15, 100/15,
- Orion 110/120WW

GX Tank 140 Interface

- 4 tank level sensors, 4-20mA / 0-10V
- for connection to Cerbo GX
- upper and lower limit values adjustable

Super-B Touch display - Epsilon 100/150Ah - 5m

- Monitoring of voltage, current, state of charge, time
- battery voltage 8 - 35 VDC - incl. 5m cable
- for Epsilon 100 & 150Ah

Super-B Touch display - Epsilon 100/150Ah - 10m

- Monitoring of voltage, current, state of charge, time
- battery voltage 8 - 35 VDC - incl. 10m cable
- for Epsilon 100 & 150Ah

Super-B Touch display - Epsilon 100/150Ah - 10m

- Monitoring of voltage, current, state of charge, time
- battery voltage 8 - 35 VDC - incl. 15m cable
- for Epsilon 100 & 150Ah

Battery monitoring without display 500A

- Battery voltage 6.5-70VDC, 500Amp
- Battery capacity 1- 9999Ah, starter battery monitoring
- VE.Direct Interface for system integration, Bluetooth

Battery monitoring without display 1000A

- Battery voltage 6.5-70VDC, 1000Amp
- Battery capacity 1- 9999Ah, starter battery monitoring
- VE.Direct Interface for system integration, Bluetooth

Battery monitoring without display 2000A

- Battery voltage 6.5-70VDC, 2000Amp
- Battery capacity 1- 9999Ah, starter battery monitoring
- VE.Direct Interface for system integration, Bluetooth

VE.BUS BMS v2 Victron Lithium Battery Management

- controls MultiPlus & Quattro's
- controls charge / discharge relay (2A / 10mA)
- pre-alarm relay & system ON / OFF, GX Power
- control of MPPT via Cerbo GX, MultiP On / OFF

Temp, humidity, pressure & motion

- Bluetooth sensor with button battery 1-2 years
- Temperature, humidity, air pressure and movement
- 52 x 12mm, Ruuvi App or Victron GX monitoring

Temperature, humidity & motion industrial sensor - IP67

- Bluetooth sensor, button battery 1-2 years
- Temperature -40 - 85°, humidity, 78 x 15mm
- Ruuvi App or Victron GX monitoring

Temperature and motion industrial sensor - IP68

- Bluetooth sensor, button battery 1-2 years
- Temperature -40 - 85°, humidity, 78 x 15mm
- Ruuvi App or Victron GX monitoring

Ruuvi Gateway - Wifi / Lan integration

- for the integration of RuuviTag sensors into Wifi / Lan
- 114mm, LAN port & USB C for power supply
- Ruuvi App or Cloud Service

RuuviTag 3M VHB adhesive

- for easy installation of RuuviTag sensors
- High-quality 3M VHB adhesive tape
- 40 x 0.65mm

RuuviTag silicone holder

- for easy mounting of RuuviTag sensors
- Screwing, tying, hanging
- 56.9 x 17.85mm, hole spacing 35mm

RuuviTag stand

- for optimal positioning of RuuviTag sensors
- improved measurement & range
- 55 x 27.74 x 18.44mm

RuuviTag Bag / Pouch

- Fabric bag with zip & velcro
- easy to carry
- length of fastening strip 3cm

Cover for GX Touch 50 display

- Protects the touch display from water, dust and UV light.
- click system attachment

Cover for GX Touch 70 display

- Protects the touch display from water, dust and UV light.
- click system attachment

Bluetooth dongle for Victron GX devices (Cerbo etc.)

- for Cerbo, MultiPlus-GX or Easysolar-GX
- replaces internal Bluetooth chip that switches off at >25°
- Plug & Play for Ruuvi sensors

Ve.Direct to NMEA2000 converter

- Converts data from SmartShunt & BMV to NMEA2000
- Converts data from MPPT solar controller to NMEA2000
- VE.Direct and NMEA2000 interface

Wifi long-range module for colour control

- USB connection & docking station
- 2.4G & 5G Wireless max. 1200 Mbps

Cerbo GX MK2 system monitoring

- 2 VE.Bus, 3 VE.Direct, 3 USB, HDMI
- 2x 2 Ve.CAN (CAN BMS capable isolated)
- MicroSD, 2 WIFI, LAN
- 4 digital, 4 tank, 4 temp inputs, 2 relays
- customised RJ45 ports

Tank sensor for Cerbo GX - 20cm

- Resistance sensor 10/180Ohm
suitable for Victron Cerbo GX
- shaft length 20cm,
- 5 hole mounting flange 69 / 38mm

Tank sensor for Cerbo GX - 30cm

- Resistance sensor 240/33 Ohm
suitable for Victron Cerbo GX
- shaft length 30cm,
- 5 hole mounting flange 69 / 38mm

CAN cable Y-split right-angled male to straight (W&M)

- M12 5-pin micro style connector (NMEA2000)
- IP68, cable length: 0.2m

CAN cable 0.4m Y-split straight (W&B)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 0.4m
- for connecting 100Ah & 150Ah Epsilon

4-way distributor plus & minus without fuses

- System voltage 12-48V, maximum current 1000A
- Connections M10, without fuses
- Connection of plus & minus, with cover cap
- Suitable for Lynx BMS 1000

CAN patch cable - 2m (M/W)

- M12 5-pin micro style connector (NMEA2000)
- IP68, gold contacts, cable length: 2m
- for connecting Nomia and Nomada Super-B batteries

4-way distributor plus & minus for MEGA fuses

- System voltage 12-48V, maximum current 1000A
- Connections M10, for 4 MEGA fuses
- Connection of plus & minus, with cover cap,
- Suitable for Lynx BMS 1000